Can I add Live Polls to my event?

You can add a live poll to your event from the Call to Actions / Chat section of the webinar editor. A live poll lets attendees choose an answer during the webinar. You can decide when it appears, how long it stays open, where it appears, and whether to display the results.


How to Add a Live Poll

  1. Open the webinar you want to update.
  2. Select Call to Actions / Chat.
  3. Open Calls to Actions. A blank call-to-action form will appear automatically.
  4. In CTA Name, enter a name that will help you identify the poll later. The name can be up to 80 characters long.
  5. In CTA Type, select Live Poll.
  6. Under Poll Start Time (Time stamp), enter when the poll should appear. Enter the minutes and seconds in the separate time fields. For example, enter 5   minutes and 30   seconds to start the poll at 5 minutes and 30 seconds.

    Under Poll Duration, enter how long the poll should remain available. The duration must be at least one second, and the seconds value must be between 0   and 59  .

    Under Display Timer, select:

    • Yes to show attendees a countdown for the poll
    • No to hide the countdown

      Under Poll Location, choose where the poll should appear:

    • Beneath Video
    • On Video
    • Top Side Right
    • Bottom side Right
  7. Under Poll Question, enter the question you want to ask.

    Enter your answer choices in Answer 1 and Answer 2. Select Add Answer to add more choices.

    You can remove an answer while more than one answer remains. The editor does not allow you to remove the final answer row.

    Under Show Results, select:

    • Yes to publish a results card at a later time
    • No if you do not want to show poll results

      If you select Yes, complete the following fields:

    • Results Start Time (Time stamp): When the results card should appear
    • Results Duration: How long the results card should remain visible

      The results start time must be later than the poll start time. Results are published at the configured results time rather than appearing immediately when someone submits an answer.

  8. Click Save.

After the poll is saved, it will appear in the Calls to Actions list. You can select Edit later to make changes.


Before You Start

Have the following ready:

  • The webinar you want to update
  • The question you want to ask
  • The answer choices you want to offer
  • The time when the poll should appear
  • How long the poll should remain available

A new poll starts with two answer fields. The editor requires at least one answer, although using two or more answer choices is recommended.


How to Check Your Setup

  1. Confirm that the poll appears in the Calls to Actions list with the correct name, type, location, start time, and duration.
  2. Save the poll before previewing it.
  3. Select Preview at the top of the Calls to Actions section. This opens the webinar watch-page preview in a new tab.
  4. Check that the poll appears in the expected location at the selected time.
  5. If you enabled Show Results, confirm that the results appear after the poll at the time you selected.

Common Issues and Solutions

Problem Solution
The poll cannot be saved Make sure CTA Name, Poll Question, every answer field, Poll Start Time, and Poll Duration are completed.
The poll duration is rejected Enter a duration of at least one second. Make sure the seconds value is between 0   and 59  .
The results settings are unavailable Show Results is unavailable when All Video Controls are enabled.
The results appear too early Set Results Start Time to a time after Poll Start Time.
The countdown is not visible Set Display Timer to Yes.
The poll appears in the wrong place Check Poll Location and select the correct placement.
Your changes are not saved Click Save before switching to another call to action or leaving the page. If a discard-changes message appears, choose the option that keeps your edits.
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us