Can I Add Simulated Polls With Results to My Event?

You can add a simulated poll to your event and choose the question, answer choices, timing, placement, and results that attendees see. The results are based on the numbers you enter and are shown to attendees as percentages.


How to Set Up a Simulated Poll


Step 1: Open the Calls to Actions section

  1. Open the webinar you want to update.
  2. Go to Customize > Call to Actions / Chat.
  3. Open the Calls to Actions section.

The poll editor is already open on this page. You do not need to select an Add Call to Action button.


Step 2: Choose Simulated Poll

  1. In CTA Name, enter a name for your poll.
  2. In CTA Type, select Simulated Poll.

The CTA name is for your reference in the editor and can be up to 80 characters.


Step 3: Choose when and where the poll appears

  1. In Poll Start Time (Time stamp), enter the time when the poll should appear.
  2. Enter the minutes in the MM field and the seconds in the SS field.
  3. In Poll Duration, enter how long the poll should remain visible.
  4. Under Display Timer, select Yes or No.
  5. Under Poll Location, choose where the poll should appear:
    • Beneath Video
    • On Video
    • Top side Right
    • Bottom side Right

The seconds field must be between 0   and 59  . The poll duration must be at least one second.


Step 4: Add the question and answers

  1. In Poll Question, enter your question.
  2. Complete Answer 1 and Answer 2.
  3. Select Add Answer to add more choices.
  4. Use the remove icon beside an answer to remove it.

The poll question and every answer need text. At least one answer must remain.


Step 5: Add the simulated results

  1. Under Show Results, select Yes.
  2. Enter a number in Results 1, Results 2, and the other result fields that appear.
  3. In Results Start Time (Time stamp), enter when the results should appear.
  4. In Results Duration, enter how long the results should remain visible.

The results start time must be later than the poll start time. If you want the results to appear after the poll closes, set the results start time after the poll duration has ended.

The numbers you enter are used to calculate the percentages shown on the results card. They are not displayed to attendees as raw vote counts. [2,6]

Important: Show Results is unavailable when the webinar uses All Controls. If you need to show simulated results, change the webinar’s video controls to another option first.


Step 6: Save the poll

Select Save.

After the poll is saved, it appears in the Calls to Action list below the editor. Saving the CTA happens immediately; the Save & Continue button is used for other webinar settings on the tab.


Before You Start

Have the following ready:

  • The poll question
  • At least two answer choices
  • The time when the poll should appear
  • How long the poll should stay visible
  • The result numbers you want to use
  • The time when the results should appear

If you are using a recorded webinar, choose times that match your video. For a live webinar, the poll can be managed from the Live Webinar Console while the event is running. [3]


How to Check Your Setup

  1. In the Calls to Actions section, select Preview.
  2. Review the poll as part of the webinar watch page.
  3. Check that the poll appears in the location you selected.
  4. Confirm that the question and answer choices are correct.
  5. Check that the poll starts at the intended time.
  6. If you enabled results, confirm that the results are scheduled for the intended time.
  7. Test the webinar as an attendee before sending traffic to it.

The section-level preview is useful for checking the watch-page layout. For timing, mobile display, and the complete attendee experience, run a real attendee test as well. [3]

Common Issues and Solutions

Problem What to Check Solution
I cannot find an Add Call to Action button. The current editor keeps a blank CTA form open. Enter the poll details in the form at the top of Calls to Actions, then select Save.
The poll will not save. A required field may be blank, the CTA name may be too long, or the timing may be invalid. Enter a CTA name, poll question, and text for every answer. Make sure the seconds fields are between 0   and 59  , and that the poll duration is at least one second.
The results option is unavailable. All Controls may be enabled for the webinar. Change the webinar’s video controls to another option, then return to the poll and enable Show Results.
The result numbers are rejected. One or more result fields may be blank, zero, or below one. Enter a positive number for every answer.
The results start too early. The results start time is the same as or earlier than the poll start time. Set the results start time later than the poll start time.
The results appear before the poll closes. Results are scheduled by their own start time. Set the results start time after the poll start time and after the poll duration if you want the results to appear only after the poll ends.
The preview does not show the expected percentages. Preview mode does not reproduce every attendee-session condition. Use Preview to check the layout, then run a real attendee test to confirm timing and the attendee-facing results.
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us